Use this form to set up value assignments for bills of materials (BOM) line fields. Use the section at the top of the form indicate whether the value of the current field is determined by a variable or by a value.

Note Note

If more than one line is entered, the lines are automatically split into separate BOM line nodes in the modeling tree after the form is closed. Lines that are entered this way must use the same assignment method for the same data field on all lines (either or ). If you have to enter BOM lines that use different assignment methods in the same data field, work with them as separate BOM line nodes instead.

Navigating the form

The following links and tables provide descriptions for the controls in this form.

Tabs

Tab

Description

Overview tab

Specify and view information about the component items, including their inventory dimensions and configuration group settings.

General tab

Specify and view the identification information for the selected line, line type, and route-related information for the line.

Setup tab

Specify and view consumption, scrap, and physical-dimension setting information for the line.

Dimension tab

Specify and view financial dimensions for the line.

Buttons

Button

Description

Specify which inventory and storage dimensions should be visible on the tab.

Fields

Field

Description

Indicates that the current field should receive a specific value, for example, a numerical value.

Indicates that the field should receive the value of a variable, for example, the result of a calculation.

Select a BOM item number if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a configuration ID if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a size ID if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about field functionality, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a color ID if you clicked in the section.

For more information about field functionality, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a warehouse ID if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Specify the quantity if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the number of units the quantity applies to if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the unit in which the quantity is specified if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the configuration group if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the BOM position if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the vendor account if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the line type if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the number of operation for which the item is used if you click in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select whether the current BOM line is used in BOM calculations if you click in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a sub-BOM if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a sub-route if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the product model number if you clicked in the section.

If you selected a product model configurable item, changing the product model number here causes this item to be configured with the selected product model instead of the product model that is registered as active for this item.

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the Product field is filled in with the value of the variable that you select.

If you selected a product model configurable item, changing the product model number causes this item to be configured with the selected product model instead of the product model that is registered as active for this item.

Select the date from which the BOM line is effective if you click in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the date to which the BOM line is effective if you click in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the consumption calculation formula if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the consumption type if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify a constant scrap value if you clicked in the section.

Scrap is calculated in the unit (for example, cm or liters) that is specified in the BOM line. Scrap is used to calculate the adjusted raw material consumption in BOM lines. For more information, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify a variable scrap value if you clicked in the section. Variable scrap is indicated in percentages, where 10% is written as 10.00. Scrap is used to calculate corrected raw material usage in the BOM lines.

For more information, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select the rounding-up method if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the multiple number if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the measurement conversion factor for the height dimension if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the measurement conversion factor for the width dimension if you clicked in the section.

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the measurement conversion factor for the depth dimension if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX BOM line field .

Specify the measurement conversion factor for the density dimension if you clicked in the section.

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

Specify the measurement conversion factor for the sales quantity if you clicked in the section.

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

Select the batch number if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select the location if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select the pallet ID if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select the serial number if you clicked in the section.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Select a modeling variable or another product model variable if you clicked in the section. The variable that you select must be type compatible with the field into which it is entered.

During item configuration, the field is filled in with the value of the variable that you select.

For more information about this field, see the help page for the standard Microsoft Dynamics AX inventory dimension field .

Enter the name of the item.

See Also